HISTORY

Debian 10 a partire dal 190221

[ 2.129991] ata5: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff300 irq 25
[ 2.129993] ata6: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff380 irq 25
[ 2.130084] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x174B:0xE990 0x00).
[ 2.130172] ATOM BIOS: 11X
[ 2.130199] radeon 0000:04:00.0: VRAM: 512M 0x0000000000000000 – 0x000000001FFFFFFF (512M used)
[ 2.130201] radeon 0000:04:00.0: GTT: 1024M 0x0000000020000000 – 0x000000005FFFFFFF
[ 2.130204] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.130205] [drm] RAM width 64bits DDR
[ 2.130280] [TTM] Zone kernel: Available graphics memory: 2020452 kiB
[ 2.130281] [TTM] Initializing pool allocator
[ 2.130287] [TTM] Initializing DMA pool allocator
[ 2.130307] [drm] radeon: 512M of VRAM memory ready
[ 2.130308] [drm] radeon: 1024M of GTT memory ready.
[ 2.130316] [drm] Loading RV710 Microcode
[ 2.130343] radeon 0000:04:00.0: firmware: direct-loading firmware radeon/RV710_pfp.bin
[ 2.130366] radeon 0000:04:00.0: firmware: direct-loading firmware radeon/RV710_me.bin
[ 2.130382] radeon 0000:04:00.0: firmware: direct-loading firmware radeon/R700_rlc.bin
[ 2.130406] radeon 0000:04:00.0: firmware: direct-loading firmware radeon/RV710_smc.bin
[ 2.130409] [drm] Internal thermal controller with fan control
[ 2.131520] [drm] radeon: dpm initialized
[ 2.131593] radeon 0000:04:00.0: firmware: direct-loading firmware radeon/RV710_uvd.bin
[ 2.131608] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.155426] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 2.155465] radeon 0000:04:00.0: WB enabled
[ 2.155468] radeon 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x(ptrval)
[ 2.155470] radeon 0000:04:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x(ptrval)
[ 2.155872] radeon 0000:04:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0x(ptrval)
[ 2.155874] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.155875] [drm] Driver supports precise vblank timestamp query.
[ 2.155876] radeon 0000:04:00.0: radeon: MSI limited to 32-bit
[ 2.155921] radeon 0000:04:00.0: radeon: using MSI.
[ 2.155943] [drm] radeon: irq initialized.
[ 2.201897] [drm] ring test on 0 succeeded in 1 usecs
[ 2.201902] [drm] ring test on 3 succeeded in 2 usecs
[ 2.386468] [drm] ring test on 5 succeeded in 1 usecs
[ 2.386471] [drm] UVD initialized successfully.
[ 2.386604] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.386620] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.416252] tsc: Refined TSC clocksource calibration: 2399.950 MHz
[ 2.416259] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298086d749, max_idle_ns: 440795294037 ns
[ 2.545401] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.545413] clocksource: Switched to clocksource tsc
[ 2.568511] ata1.00: ATA-8: Hitachi HDP725032GLA380, GM3OA52A, max UDMA/133
[ 2.568514] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.569446] ata1.00: configured for UDMA/133
[ 2.569655] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72503 A52A PQ: 0 ANSI: 5
[ 2.608338] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c00015a0b6b, S400
[ 2.676221] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.872232] usb 5-1: New USB device found, idVendor=046d, idProduct=c05b, bcdDevice=54.00
[ 2.872235] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.872238] usb 5-1: Product: USB Optical Mouse
[ 2.872240] usb 5-1: Manufacturer: Logitech
[ 2.881841] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.882571] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.899540] usbcore: registered new interface driver usbhid
[ 2.899541] usbhid: USB HID core driver
[ 2.901354] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C05B.0001/input/input5
[ 2.901429] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 3.056261] [drm] ib test on ring 5 succeeded
[ 3.056649] [drm] Radeon Display Connectors
[ 3.056650] [drm] Connector 0:
[ 3.056650] [drm] VGA-1
[ 3.056652] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 3.056652] [drm] Encoders:
[ 3.056653] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 3.056654] [drm] Connector 1:
[ 3.056655] [drm] HDMI-A-1
[ 3.056655] [drm] HPD1
[ 3.056656] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 3.056657] [drm] Encoders:
[ 3.056658] [drm] DFP1: INTERNAL_UNIPHY
[ 3.056658] [drm] Connector 2:
[ 3.056659] [drm] DVI-I-1
[ 3.056659] [drm] HPD4
[ 3.056661] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 3.056661] [drm] Encoders:
[ 3.056662] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.056662] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.120954] [drm] fb mappable at 0xD034D000
[ 3.120955] [drm] vram apper at 0xD0000000
[ 3.120955] [drm] size 8294400
[ 3.120956] [drm] fb depth is 24
[ 3.120957] [drm] pitch is 7680
[ 3.121014] fbcon: radeondrmfb (fb0) is primary device
[ 3.171523] Console: switching to colour frame buffer device 160×64
[ 3.174637] radeon 0000:04:00.0: fb0: radeondrmfb frame buffer device
[ 3.188317] [drm] Initialized radeon 2.50.0 20080528 for 0000:04:00.0 on minor 0
[ 3.194548] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.195062] ata3.00: ATAPI: TSSTcorp CDDVDW TS-H653Q, 0303, max UDMA/33
[ 3.195813] ata3.00: configured for UDMA/33
[ 3.196769] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653Q 0303 PQ: 0 ANSI: 5
[ 3.460271] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 3.534666] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.657234] usb 5-2: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[ 3.657237] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.657239] usb 5-2: Product: USB Keyboard
[ 3.657242] usb 5-2: Manufacturer: Logitech
[ 3.691760] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:046D:C31C.0002/input/input6
[ 3.748450] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-2/input0
[ 3.782991] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:046D:C31C.0003/input/input7
[ 3.840379] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:046D:C31C.0003/input/input8
[ 3.840429] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-2/input1
[ 3.846762] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.056218] usb 4-5: new high-speed USB device number 4 using ehci-pci
[ 4.158632] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.166734] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.166743] sd 0:0:0:0: [sda] Write Protect is off
[ 4.166745] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.166756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 4.192630] sda: sda1 sda2 sda3
[ 4.193018] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.207190] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.207192] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.207468] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.214064] usb 4-5: New USB device found, idVendor=058f, idProduct=6377, bcdDevice= 1.00
[ 4.214067] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.214068] usb 4-5: Product: Mass Storage Device
[ 4.214070] usb 4-5: Manufacturer: Generic
[ 4.214071] usb 4-5: SerialNumber: 920321111113
[ 4.219531] usb-storage 4-5:1.0: USB Mass Storage device detected
[ 4.219679] scsi host6: usb-storage 4-5:1.0
[ 4.219774] usbcore: registered new interface driver usb-storage
[ 4.221583] usbcore: registered new interface driver uas
[ 4.809757] random: fast init done
[ 5.232971] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 5.233581] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 5.234203] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 5.234827] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 5.237251] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5.238825] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 5.241075] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 5.248581] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 5.352371] random: plymouthd: uninitialized urandom read (8 bytes read)
[ 5.352555] random: plymouthd: uninitialized urandom read (8 bytes read)
[ 5.528220] raid6: sse2x1 gen() 3783 MB/s
[ 5.596202] raid6: sse2x1 xor() 4072 MB/s
[ 5.664216] raid6: sse2x2 gen() 4885 MB/s
[ 5.732203] raid6: sse2x2 xor() 4985 MB/s
[ 5.800207] raid6: sse2x4 gen() 7392 MB/s
[ 5.868209] raid6: sse2x4 xor() 5549 MB/s
[ 5.868210] raid6: using algorithm sse2x4 gen() 7392 MB/s
[ 5.868211] raid6: …. xor() 5549 MB/s, rmw enabled
[ 5.868212] raid6: using ssse3x2 recovery algorithm
[ 5.878722] xor: measuring software checksum speed
[ 5.916205] prefetch64-sse: 9509.000 MB/sec
[ 5.956201] generic_sse: 8421.000 MB/sec
[ 5.956202] xor: using function: prefetch64-sse (9509.000 MB/sec)
[ 6.059389] Btrfs loaded, crc32c=crc32c-generic
[ 6.640731] cryptd: max_cpu_qlen set to 1000
[ 6.822240] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.225297] systemd[1]: Inserted module ‘autofs4’
[ 8.253473] random: crng init done
[ 8.393035] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 8.412293] systemd[1]: Detected architecture x86-64.
[ 8.434013] systemd[1]: Set hostname to .
[ 9.909293] systemd[1]: Listening on Syslog Socket.
[ 9.909387] systemd[1]: Reached target Swap.
[ 9.909451] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.910610] systemd[1]: Created slice User and Session Slice.
[ 9.910627] systemd[1]: Reached target Slices.
[ 9.911114] systemd[1]: Created slice system-openvpn.slice.
[ 9.911184] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.141324] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 10.334124] systemd-journald[236]: Received request to flush runtime journal from PID 1
[ 11.895735] audit: type=1400 audit(1613726545.673:2): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”libreoffice-senddoc” pid=271 comm=”apparmor_parser”
[ 11.896324] audit: type=1400 audit(1613726545.677:3): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”libreoffice-oopslash” pid=272 comm=”apparmor_parser”
[ 11.921722] audit: type=1400 audit(1613726545.701:4): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”libreoffice-xpdfimport” pid=275 comm=”apparmor_parser”
[ 11.922331] audit: type=1400 audit(1613726545.701:5): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”nvidia_modprobe” pid=274 comm=”apparmor_parser”
[ 11.922336] audit: type=1400 audit(1613726545.701:6): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”nvidia_modprobe//kmod” pid=274 comm=”apparmor_parser”
[ 11.940112] audit: type=1400 audit(1613726545.717:7): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session” pid=270 comm=”apparmor_parser”
[ 11.940118] audit: type=1400 audit(1613726545.717:8): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium” pid=270 comm=”apparmor_parser”
[ 11.940629] audit: type=1400 audit(1613726545.721:9): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”/usr/bin/man” pid=276 comm=”apparmor_parser”
[ 11.940632] audit: type=1400 audit(1613726545.721:10): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”man_filter” pid=276 comm=”apparmor_parser”
[ 11.940637] audit: type=1400 audit(1613726545.721:11): apparmor=”STATUS” operation=”profile_load” profile=”unconfined” name=”man_groff” pid=276 comm=”apparmor_parser”
[ 12.573768] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 13.416421] kvm: disabled by bios
[ 13.459296] kvm: disabled by bios
[ 13.491548] kvm: disabled by bios
[ 13.543362] kvm: disabled by bios
[ 13.770225] coretemp coretemp.0: Using relative temperature scale!
[ 13.770894] coretemp coretemp.0: Using relative temperature scale!
[ 13.770928] coretemp coretemp.0: Using relative temperature scale!
[ 13.771064] coretemp coretemp.0: Using relative temperature scale!
[ 14.117085] intel_powerclamp: No package C-state available
[ 14.148583] intel_powerclamp: No package C-state available
[ 14.184668] intel_powerclamp: No package C-state available
[ 14.232625] intel_powerclamp: No package C-state available
[ 14.762365] iTCO_vendor_support: vendor-support=0
[ 14.780643] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.780692] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 14.781415] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.782837] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.783381] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 14.783643] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 14.783869] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 14.784008] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 14.784145] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 15.884190] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[ 16.021167] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input10
[ 16.277362] snd_hda_codec_realtek hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
[ 16.278045] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 16.278047] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.278049] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 16.278051] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 16.278052] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 16.278054] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 16.278056] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 16.278058] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 16.278059] snd_hda_codec_realtek hdaudioC0D0: Line=0x1c
[ 16.278061] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f
[ 16.293829] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 16.296960] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 16.297092] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 16.298830] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 16.299147] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 16.300280] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 16.301955] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 16.303779] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 16.303883] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 21.833333] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 21.833904] RTL8211B Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 21.932419] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 23.525475] r8169 0000:02:00.0 enp2s0: Link is Up – 100Mbps/Full – flow control rx/tx
[ 23.525486] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 31.337483] tun: Universal TUN/TAP device driver, 1.6
[ 4107.816098] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 4773.510097] perf: interrupt took too long (3141 > 3136), lowering kernel.perf_event_max_sample_rate to 63500
[ 6248.133368] perf: interrupt took too long (3927 > 3926), lowering kernel.perf_event_max_sample_rate to 50750
tullio@servervpn:~$ history
1 dmesg
2 sudo dmesg
3 sudo apt-get update
4 dmesg
5 sudo dmesg
6 lspci -nn | grep VGA
7 sudo lspci -nn | grep VGA
8 apt-get install lspci
9 sudo apt-get install lspci
10 sudo apt-get install aptitude
11 su
12 whoami
13 su sudo
14 su
15 sudo root passwd
16 root passwd
17 sudo su
18 wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
19 sudo wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
20 sudo apt-get install wget
21 sudo wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
22 ls
23 sudo dpkg -i google-chrome-stable_current_amd64.deb
24 cd /etc/gdm3
25 ip a
26 sudo apt update
27 ip a show eth0
28 ip a
29 ip a show emp2s0
30 ip a show enp2s0
31 lsb_release -a
32 ip a
33 dig +short myip.opendns.com
34 sudo dig +short myip.opendns.com
35 sudo apt install dig
36 wget https://raw.githubusercontent.com/Angristan/openvpn-install/master/openvpn-install.sh -O debian10-vpn.sh
37 ls
38 chmod +x debian10-vpn.sh
39 joe debian10-vpn.sh
40 sudo ./debian10-vpn.sh
41 sudo systemctl start openvpn@server
42 sudo systemctl status openvpn@server

43 ip a
44 ip a show enp2s0
45 ip a show tun0
46 ls
47 scp
48 root scp
49 sudo apt install scp
50 sudo aptitude install scp
51 ssh
52 aptitude install putty
53 sudo aptitude install putty
54 sudo aptitude install ssh openssh-server
55 ssh
56 sudo aptitude install ssh openssh-client
57 scp
58 scp tullio@:;3~/hplento.ovpn
59 sudo scp tullio@:;3~/hplento.ovpn
60 sudo scp tullio@:~/hplento.ovpn
61 sudo scp tullio@:~/hplento.ovpn .
62 ls
63 joe hplento.ovpn
64 firewall-cmd –permanent
65 sudo firewall-cmd –permanent
66 sudo firewall-cmd –permanent –add-port=22/tcp
67 ip a
68 sudo aptitude install vncserver
69 sudo aptitude install real-vnc-server
70 sudo aptitude install realvnc-vnc-server
71 sudo aptitude install gdebi
72 gdebi
73 sudo aptitude install gdebi
74 sudo apt install gdebi-core gdebi
75 which gdebi
76 IFCONFIG
77 ifconfig
78 ip a
79 scp
80 ls
81 sudo scp tullio@192.168.2.13:hplento.ovpn /home
82 sudo scp pi@192.168.2.13:hplento.ovpn /home
83 sudo scp hplento.ovpn pi@192.168.2.13 /home
84 sudo scp hplento.ovpn pi@192.168.2.13:/home
85 sudo scp hplento.ovpn tullio@192.168.2.13:/home
86 sudo scp hplento.ovpn pi@192.168.2.13:/home/pi
87 ip a
88 lsusb
89 fdisk -l
90 sudo su
91 ls
92 df
93 ip a
94 dmesg
95 sudo dmesg
96 history
tullio@servervpn:~$ history >storia190221.txt
tullio@servervpn:~$ joe storia190221.txt

^K IW storia190221.txt Row 1 Col 1
1 dmesg
2 sudo dmesg
3 sudo apt-get update
4 dmesg
5 sudo dmesg
6 lspci -nn | grep VGA
7 sudo lspci -nn | grep VGA
8 apt-get install lspci
9 sudo apt-get install lspci
10 sudo apt-get install aptitude
11 su
12 whoami
13 su sudo
14 su
15 sudo root passwd
16 root passwd
17 sudo su
18 wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd6
19 sudo wget https://dl.google.com/linux/direct/google-chrome-stable_current
20 sudo apt-get install wget
21 sudo wget https://dl.google.com/linux/direct/google-chrome-stable_current
22 ls
23 sudo dpkg -i google-chrome-stable_current_amd64.deb
No modified files, so no updates needed.
tullio@servervpn:~$ joe storia190221.txt

IW   storia190221.txt                                      Row 1    Col 1   
1  dmesg
2  sudo dmesg
3  sudo apt-get update
4  dmesg
5  sudo dmesg
6  lspci -nn | grep VGA
7  sudo lspci -nn | grep VGA
8  apt-get install lspci
9  sudo apt-get install lspci

10 sudo apt-get install aptitude
11 su
12 whoami
13 su sudo
14 su
15 sudo root passwd
16 root passwd
17 sudo su
18 wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd6
19 sudo wget https://dl.google.com/linux/direct/google-chrome-stable_current
20 sudo apt-get install wget
21 sudo wget https://dl.google.com/linux/direct/google-chrome-stable_current
22 ls
Joe’s Own Editor 4.6 (utf-8) ** Type Ctrl-K Q to exit or Ctrl-K H for help **

Lascia un commento